1.1.3. Prevent Vibration in Ships
선박에서의 주요 진동 문제는 main engine 및 프로펠러에 의해 발생된다. 프로펠러에 의한 exciting force는 surface force나 bearing force, thrust force를 발생시키며, 발생된 force들은 hull girder 진동을 일으킨다.
다른 종류의 진동으로는 wave force로 인한 whipping 및 springing이 있으며, 다음 장
torsion)등의 여러 가지 힘을 받는다. 그리고 크랭크축의 크랭크 저널 중에서 기관 중앙부에 있는 저널은 크랭크 앞쪽 또는 뒤쪽의 저널보다 큰 압력을 받게 된다.
크랭크 핀 2개에 대하여 1개의 저널을 가진 경우에 저널의 지름을 구하여 보기로 한다. 실린더의 지름 (), 저널의 지름 (), 저널의 폭 =1.3(),
General Process of 3D printing
FDM - Fused Deposition Molding
FDM works on an "additive" principle by laying down material in layers.
The model is produced by extruding small beads of thermoplastic material to form layers as the material hardens immediately after extrusion from the nozzle.
The nozzle can be moved in both horizontal and vertical directions by a numerically controlled mechanism
3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the
▶ Danile David palmer(1845-1913)
교재 : 카이로프락틱 치료 - 질병을 치료하기 위해 아탈구(subluxed)된 척추를 교정하는 기술
1895년에 경추에 조정(adjusting)을 가함으로써 농아를 치료
1897년에 카이로프락틱 학교를 창설
▶ 정의 : 신체에 조정과 손조절(manupulation)을 함으로써 신체배열을 치유하는 과학
Pain의 기전
VISCERAL PAIN
Visceral pain is transmitted by C fibers that are found in muscle, periosteum, mesentery, peritoneum, and viscera. Most painful stimuli from abdominal viscera are conveyed by this type of fiber and tend to be dull, cramping, burning, poorly localized, and more gradual in onset and longer in duration than somatic pain. Because abdominal organs transmit sensory af
2.4. Bonjean Curve
많은 학생들이 Bonjean Curve 에 대해 답을 하지 못하였다고 하셨다. 우리 조원들도 이 문제에 대해 거의 답을 하지 못하였다고 했다. Bonjean Curve는 부력의 개념이다.
그림 Bonjean Curve
임의의 수선에서 횡단면의 면적은 Simpson's 1st Rule 같은 방법으로 구할 수 있고 이를 수선변화에 따른 곡
나노복합재료연구실 ( Nano Composite Research Lab.)
1. Purpose of this study
■ Measurement of Young's modulus using sonic resonant test
■ Measurement of Young's modulus using beam bending test
2. Introduction
Young's modulus is one of the important materials properties that is related with the bonding force between atoms or ions in materials. That will give a cle
1) 지진파
① 지구 내부의 어떤 부분에서 파괴가 일어나면, 이에 의한 교란은 탄성파로써 지구 내부를 전파해간다. 이러한 탄성파를 지진파(earthquake wave 또는 seismic wave)라고 하며, 지진이 발생한 지점을 진원(震源, focus or hypocenter), 진원 바로 위 지표면 상의 지점을 진앙(震央, epicenter)이라고 한다.
1. 목 적
전세계 및 국내적인 산업환경변화와 지역적인 산업환경 특성에 창의적이며 유연성있게 적응해 갈 수 있는 현장 중심적인 전문 기술인 양성이 아주 긴급히 요구되고 있다. 이러한 시대적인 요구에 부응하기 위해서는 기존의 전통적인 기계공학만의 교육과정에서 탈피하여 전기전자의 기